This is the first in what will be a series of posts that I hope will help you assemble a few of the trickier models
One of the leg poses for the Lynx walker has the hip joint tilted back. This is an error, but can be easily corrected. You will need a pair of thin pliers and a rubber band.
Wrap the rubber band around the hip. Here, I snipped it in half first, but in the future I would recommend just doubling it over.
Next, take the pliers and line it up with the rubber band, and settle it carefully just in front of the top circle. Using a light grip, very slowly begin pushing on the legs until they are rotated back in line with the hip.
Don't worry too much if the top pin a little squished like here. Just clean up any damaged parts with a hobby knife.
That's it! You are ready to add the hull and weapons. I hope this was helpful, be sure to check back for more tips!